Differences

This shows you the differences between two versions of the page.

--- m0dul-flame_rgb-mod [2011/08/17 22:56] – created joe
+++ m0dul-flame_rgb-mod [2011/08/18 16:56] (current) – [Step 2] joe
@@ Line 1: / Line 1: @@
 ====== material ======
+  * original [[m0dul-flame| flame m0dul]]
   * 1x RGB LED
   * 2x 100K SMD Resistors
@@ Line 9: / Line 10: @@
 ====== building ======
+{{:flame_rgb-mod.jpg?direct&200|}}
 ====== Step 1 ======
@@ Line 15: / Line 17: @@
 ===== Step 2 =====
-  * solder the RGB LED to contact A1 and C1 those pads were used by the original one-color LED
+  * solder the RGB LED contacts A1 and C1 to the original solder pads from the one-color LED
-  * solder the hookup wire to contact C2 and C3
+  * solder one hookup wire to each contact C2 and C3 on your RGB LED
   * connect A2 and A3 together and solder one hookup wire to it
-{{hookup_wire_to_LED.jpg|hookup wire connected to LED}}
+{{:flame_rgb-mod_1.jpg?direct&200|}}
 ===== Step 3 =====
@@ Line 26: / Line 28: @@
   * connect the third wire to VCC
-{{hookup_wire_to_LED.jpg|hookup wire connected to LED}}
+{{:flame_rgb-mod_2.jpg?direct&200|}}