m0dul-flame_rgb-mod
This is an old revision of the document!
material
- 1x RGB LED
- 2x 100K SMD Resistors
- a few centimeters hookup wire (german: Fädeldraht)
- soldering equipment
building
Step 1
- unscrew the acrylic flame
- unsolder the original one-color LED
Step 2
- solder the RGB LED to contact A1 and C1 those pads were used by the original one-color LED
- solder the hookup wire to contact C2 and C3
- connect A2 and A3 together and solder one hookup wire to it
Step 3
- solder two 100K Resistors to the board
- connect the two wires from C2 and C3 to the board
- connect the third wire to VCC
m0dul-flame_rgb-mod.1313614611.txt.gz · Last modified: by joe