Differences

This shows you the differences between two versions of the page.

--- hardware [2011/06/14 23:34] – external edit 127.0.0.1
+++ hardware [2013/02/10 23:51] (current) – [CPU] updated LPC1343 Datasheet and Manual links trapicki
@@ Line 1: / Line 1: @@
-====== Board ======
+== Hardware ==
-Links: [[http://aaa|Eagle files]]
+=== Intro ===
+We want to encourage you to tinker with your r0ket. Write your own software or build a pluggable hardware [[m0dul]]. Surprise with your creative ideas!
+Several people contacted us about producing r0kets for other occasions. All necessary information is on github and we're happy to help. But you should plan ahead at least 2 months!
+====== Schematic ======
+{{:r0ket.sch.png?direct&400|}}
+Links: [[https://github.com/r0ket/r0ket/tree/master/hardware/r0ket|Schematic]]
 ====== CPU ======
@@ Line 8: / Line 18: @@
 Description: 32-bit ARM Cortex-M3 microcontroller with 32KB flash, 8KB SRAM, USB Device
-Links: [[http://ics.nxp.com/products/lpc1000/all/~LPC1343/|Vendor]] [[http://ics.nxp.com/products/lpc1000/datasheet/lpc1311.lpc1313.lpc1342.lpc1343.pdf|Datasheet]] [[http://ics.nxp.com/support/documents/microcontrollers/pdf/user.manual.lpc13xx.pdf|Manual]]
+Links: [[http://ics.nxp.com/products/lpc1000/all/~LPC1343/|Vendor]] [[http://www.nxp.com/documents/data_sheet/LPC1311_13_42_43.pdf|Datasheet]] [[http://www.nxp.com/documents/user_manual/UM10375.pdf|Manual]]
 ====== LCD ======
+r0ket v1 and v2 come with a black and white display:
 Name: Nokia 1200
-Description: Nokia 1200 - 96x55 (green) monochrome LCD
+Description: Nokia 1200 - 96x68 (green) monochrome LCD
-Pin compatible: Nokia 1600 - 98x70 4096 color LCD
+Controller: Phillips PCF8814 [[http://mylcd.sourceforge.net/files/pcf8814.pdf|Datasheet]]
+Connector: Hirose DF23-10DS [[http://www.sparkfun.com/datasheets/LCD/Hirose-DF23.pdf|Datasheet]]
 Video: [[http://www.youtube.com/watch?v=GZlOOvKoToE|Nokia displays]]
+The Nokia 1600 - 98x70 4096 color LCD is pin compatible.
+Software to use this display with r0ket exists - see [[colordisplay]] for more.
 ====== RF ======
-Name: nRF24L01
+Name: nRF24L01+
 Description: Single Chip 2.4GHz Transceiver with an embedded baseband protocol engine. ISM frequency band at 2.400 - 2.4835GHz
-Links: [[http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01|Vendor]] [[http://www.nordicsemi.com/eng/content/download/2730/34105/file/nRF24L01_Product_Specification_v2_0.pdf|Datasheet]]
+Links: [[http://www.nordicsemi.com/kor/Products/2.4GHz-RF/nRF24L01P|Vendor]] [[http://www.nordicsemi.com/kor/content/download/2726/34069/file/nRF24L01P_Product_Specification_1_0.pdf|Datasheet]]
+===== Antenna =====
+its 50 ohms, so you can easily extend it by e.g. a cantenna
+Links: [[ http://www.johansontechnology.com/images/stories/ip/rf-antennas/Antenna_2450AT42A100_08-29-2008.pdf | Datasheet]]
 ====== Battery ======
-Description: 3.7V 600mAh rechargable LiPo battery
+Description: Custom made 3.7V 600mAh rechargeable LiPo battery
 ====== Dataflash ======
@@ Line 37: / Line 59: @@
 ====== Interfaces ======
-The r0ket can easily be extended by [[m0dule|m0dules]]. A m0dule can be either connected via the m0dulebus or the hackerbus.\\
-All connectors are in 2.54mm/100mil spacing where __only__ the m0dulebus is prepopulated with female sockets. If available a stackthrough connector __should__ be used to interface with the m0dulebus.
-==== M0dulbus ====
+===== m0dulbus =====
-Pins: GND, 3.3V, VCC, I2C, SPI, chip select, bus interrupt\\
+See [[m0dul#hardware|m0dul]] for details.
-{{:r0ket-bus-m0dule.png?100&direct|}}
+Connector: 2x06 female socket (2.54mm/100mil)
+{{:r0ket-m0dulbus.png?400&direct|}}
+m0dulA
+^Pin^Name^Description^
+|1 |3V3_EXP| Fixed 3.3V|
+|2 |MISO   | SPI: Master in, Slave out|
+|3 |MOSI   | SPI: Master out, Slave in|
+|4 |SCK    | SPI: Clock|
+|5 |GND    | Ground|
+|6 |SS0    | Chip select for SPI or general purpose IO RB_SPI_SS0 = PIO2_5|
+|7 |SDA    | I2C: Data|
+|8 |SS1    | CS for SPI or general purpose IO RB_SPI_SS1 = PIO2_4|
+|9 |SCL    | I2C: Clock|
+|10|SS2    | CS for SPI or general purpose IO RB_SPI_SS0 = PIO2_8|
+|11|BUSINT | Active LOW open-drain interrupt |
+|12|VCC_EXP| Battery voltage (4.5-3.5V) |
+m0dulB
+^Pin^Name^Description^
+|1 |3V3_EXP| Fixed 3.3V|
+|2 |MISO   | SPI: Master in, Slave out|
+|3 |MOSI   | SPI: Master out, Slave in|
+|4 |SCK    | SPI: Clock|
+|5 |GND    | Ground|
+|6 |SS3    | Chip select for SPI or general purpose IO RB_SPI_SS3 = PIO3_2|
+|7 |SDA    | I2C: Data|
+|8 |SS4    | CS for SPI or general purpose IO RB_SPI_SS4 = PIO3_1|
+|9 |SCL    | I2C: Clock|
+|10|SS5    | CS for SPI or general purpose IO RB_SPI_SS5 = PIO2_10|
+|11|BUSINT | Active LOW open-drain interrupt |
+|12|VCC_EXP| Battery voltage (4.5-3.5V) |
+===== Hackerbus =====
+The Hackerbus is an additional bus for fast and dirty hacking. But be careful, unlike to the m0dulbus you can't combine/stack extensions there!
+Connector: Optional (not prepopulated) 1x06 female socket (2.54mm/100mil)
+{{:r0ket-hackerbus.png?200&direct|}}
+Hackbus HB1
+^Pin^Name^Description^
+|1|+3V3_EXP| Fixed 3.3V|
+|2|GND|Ground|
+|3|VCC_EXP|Battery Voltage|
+|4|HB3|PIO0_2/SSEL/CT16B0_CAP0|
+|5|HB4|PIO1_4/AD5/CT32B1_MAT3/WAKEUP //pulled up to +3V3 to enable deep power-down, not usable as ADC//|
+|6|HB5|PIO1_2/AD3/CT32B1_MAT1/TRST|
-==== Hackerbus ====
-optional, not populated
-Pins: GND, 3.3V, VCC, GPIO\\
+Hackerbus HB2
-{{:r0ket-bus-hacker.png?100&direct|}}
+^Pin^Name^Description^
+|1|+3V3_EXP| Fixed 3.3V|
+|2|GND|Ground|
+|3|VCC_EXP|Battery Voltage|
+|4|HB0|PIO1_3/AD4/CT32B1_MAT2/SWDIO|
+|5|HB1|PIO0_10/SCK/CT16B0_MAT2/SWCLK|
+|6|HB2|PIO1_1/AD2/CT32B1_MAT0/TDO|
 ====== micro SD slot ======
@@ Line 54: / Line 129: @@
 optional, not populated
-Links: [[http://www.sparkfun.com/products/127|Sparkfun]]
+from: [[http://www.sparkfun.com/products/127|Sparkfun]](item nr. PRT-00127) or [[http://www.csd-electronics.de| csd-electronics]] (item. nr. 020-TFH1, [[http://i.imgur.com/GzkFe.jpg|datasheet]])
+====== LEDs ======
+^LED ^ Port^ Location ^ Color^
+|RB_LED0|PIO0_11|bottom left|green|
+|RB_LED1|PIO1_7|top left|green|
+|RB_LED2|PIO1_6|bottom right|green|
+|RB_LED3|PIO1_11|top right|red|
 ====== Misc ======
-LEDs, IR, 5 way switch, micro USB
+Four LEDs
+One 5 way switch ([[http://uk.farnell.com/multicomp/mcmt5-f-v/navigationsschalter-5polig-smd/dp/1316987?Ntt=1316987|farnell]])
+Micro USB (2.0) socket
+=== Further reading ===
+  * Documentation on [[m0dul]] development
+  * Show your Hardware [[hardware-mods|modifications]]