====== material ======
  * original [[m0dul-flame| flame m0dul]]
  * 1x RGB LED
  * 2x 100K SMD Resistors
  * a few centimeters hookup wire (german: Fädeldraht)
  * soldering equipment

[[http://www.reichelt.de/OSRAM-Multi-LED/LRTB-G6TG/index.html?;ACTION=3;LA=2;ARTICLE=65109;|Source LRTB G6TG RGB MultiLED]]
[[http://www.reichelt.de/index.html?;ACTION=7;LA=3;OPEN=0;INDEX=0;FILENAME=X100%252Flrtb_g6tg.pdf;SID=15xY-BXawQAQ8AADZf68Ab70066a8b9826546e3c7c3b299bd5c93 | LED Datasheet]]

====== building ======
{{:flame_rgb-mod.jpg?direct&200|}}

====== Step 1 ======
  * unscrew the acrylic flame
  * unsolder the original one-color LED

===== Step 2 =====
  * solder the RGB LED contacts A1 and C1 to the original solder pads from the one-color LED
  * solder one hookup wire to each contact C2 and C3 on your RGB LED  
  * connect A2 and A3 together and solder one hookup wire to it

{{:flame_rgb-mod_1.jpg?direct&200|}}

===== Step 3 =====
  * solder two 100K Resistors to the board 
  * connect the two wires from C2 and C3 to the board
  * connect the third wire to VCC 
  
{{:flame_rgb-mod_2.jpg?direct&200|}}